| |
Product Name- |
# |
Price |
 |
OBD-2 Connector XII - (SAE J1962 Typ A) - right or left angle
(#32025)
A short OBD-2 / EOBD connector with cable strain relief by friction:
All 16 pins are supplied;
Cable entry can be left or right hand.
Must be use with a 5mm diameter cable (not...
[ more informations ] |
|
|
from 13.95 €
incl. VAT
(11.72 € Netto)
+ shipping
 |
 |
OBD-2 Connector XI - (SAE J1962 Typ A)
(#36013)
Plug kit after J1962 (Obd-2/eobd) with 16 pins consisting of pin carrier boltable with housing cap and boltable cable assembly discharge with break protection as shown;
Cable connection of the 16 pins with solder joint. Durable qualityquality...
[ more informations ] |
|
|
from 4.49 €
incl. VAT
(3.77 € Netto)
+ shipping
|
 |
OBD-2 Connector VIII - (SAE J1962 Typ B) - (24V / Trucks)
(#32010)
Plug kit after J1962 (Obd-2/eobd) with 8 pins consisting of pin carrier boltable with housing cap and boltable cable assembly discharge with break protection as shown. Cable connection of the 16 pins with solder joint.Durable qualityquality...
[ more informations ] |
|
|
from 16.36 €
incl. VAT
(13.75 € Netto)
+ shipping
|
 |
OBD-2 Connector VI - (SAE J1962 Typ B) - (24V / Trucks)
(#34004)
Plug kit after J1962 (Obd-2/eobd) with 16 pins consisting of pin carrier boltable with housing cap and boltable cable assembly discharge with break protection as shown. Cable connection of the 16 pins with solder joint. Durable qualityquality quality....
[ more informations ] |
|
|
39.95 €
incl. VAT
(33.57 € Netto)
+ shipping
|
 |
OBD-2 Connector II - (SAE J1962 Typ A)
(#30005)
Three-part housing after J1962 (Obd-2/eobd) for 16 pins.Consisting of 2-schaliger cover/housing and pin carrier as shown, no cable assembly discharge. Supply with 16 pins, cadmium plates on volume carriers.
delivery time:
immediately...
[ more informations ] |
|
|
from 13.95 €
incl. VAT
(11.72 € Netto)
+ shipping
|
 |
OBD-2 Connector XVII - (SAE J1962 Typ B) - (24V / Trucks)
(#30076)
Unsealed male one-piece connector shell for 16 pins without rear cover as shown, for OBD-2 / EOBD (J1962);
Type B - for Commercial motor vehicles (Trucks) / 24V
Supply with 10 (pins) such as illustration under it, cable before-tins. See...
[ more informations ] |
|
|
from 1.96 €
incl. VAT
(1.65 € Netto)
+ shipping
|
 |
OBD-2 Connector IV - (SAE J1962 Typ A)
(#30071)
Unsealed male one-piece connector shell for 16 pins without rear cover as shown, for OBD-2 / EOBD (J1962);
Supply with 10 (pins) such as illustration under it, cable before-tins. See also design...
Size = 32.5L x 19.0H x 41.1W
Color =...
[ more informations ] |
|
|
from 1.96 €
incl. VAT
(1.65 € Netto)
+ shipping
|
 |
OBD-2 Connector I - (SAE J1962 Type A)
(#30001)
One-piece connector shell after J1962 (OBD-2/EOBD) for 16 pins without rear cover as shown.
Supply with 10 pins, copper on volume carriers such as illustration under it, cable-pins before-tins.
...
[ more informations ] |
|
|
9.95 €
incl. VAT
(8.36 € Netto)
+ shipping
|
 |
OBD-2 Case CNS for OBD-PCBs
(#30063)
This 2-pieces cases are designed to hold a PCP (max. 30x36mm) and the male OBD2 connector block (Article number #30001) and require use of hot melt glue to hold block in place.
...
[ more informations ] |
|
|
9.95 €
incl. VAT
(8.36 € Netto)
+ shipping
|
 |
OBD-2 Case CNM for OBD-PCBs
(#30064)
This 2-pieces cases are designed to hold a PCP (55x36/32mm) and the male OBD2 connector block (#30001) and require use of hot melt glue to hold block in place.
...
[ more informations ] |
|
|
9.95 €
incl. VAT
(8.36 € Netto)
+ shipping
|
