|
| |
|
 |
|
|
|
The latest 4.03 release contains many extra features for our customers. Multi-protocol + CAN support, includes Freeze Frame Data, includes Gauges for appropriate sensors, a direct serial interface for custom queries, ability to chart 4 sensors at once, queries hardware 5x faster (20ms delay), allows all sensors to be queried regardless of support, the entire application contains both English/Metric support, based on new communication code for increased stability, user preferences saved in memory for quick launch. The OBD II software is used strictly to retrieve and diagnose your vehicles information and is not designed to tamper with or change anything outside of its domain.
The Digimoto 4.03 software also includes improved charting capabilities and dynamic tolerance capabilities allowing the software to adapt on the fly to the limitations of the car it is running on. Whether your car can run at a maximum speed of 80mph or 300mph, the software will adjust its readings and graphs accordingly.
Digimoto Pocket PC Edition v1.0 has arrived! The Digimoto Pocket PC v1.0 software was designed to contain the same capabilities as the desktop software. The Digimoto Pocket PC version is designed for the mobile mechanic, but does not suffer in power for being such a small application. If you have any questions regarding specific modules, you can review the information on the desktop software above. The Digimoto Pocket PC was designed for use on all Pocket PC 2002 and Pocket PC 2003 devices.
|
|
|
|
|
|
| |
|
|
|
|
| Digimoto is multiple things. Digimoto is an application that is used for diagnostics, but not just diagnostics alone. It is also used to measure vehicle performance and the state of your vehicles systems at any given point in time. Whether you are a mechanic or strictly into street racing, the Digimoto is the tool of choice. |
|
|
|
|
|
| |
|
|
|
|
|
|
| Leistungsmessung via OBD-2 / EOBD Schnittstelle. |
|
|
|
|
|
| Finalist - Software von Özen |
|
|
|
|
|
Supports Fiat, Alfa Romeo and Lancia
Supports FIAT KWP2000 k-line diagnostic
• Support 3 K-Line to access to ABS and Airbag on pin 1,3, and 7
• Support B-CAN and C-CAN messaging strategy
• Manufacturer specific messaging not limited at EOBD
• Access to all sae j2012 / j1979 modes
• ASCII command set to work with hyperterminal |
|
|
|
|
|
| mOByDic - Software von Özen |
|
|
|
|
|
|
|
|
|
| Rudimäntäre Software vom Hersteller. |
|
|
|
|
|
| |
|
|
|
|
|
Car diagnostic Shareware solution for OBD2 interfaces.
|
|
|
|
|
|
| OBD-II ScanMaster for mOByDic |
|
|
|
|
|
| OBD-II KFZ Diagnostic Software für Jedermann. OBD-II ScanMaster ermöglicht jedem Autobesitzer mit eigenem PC oder Laptop die Diagnostic der Motosteuerung seines Farzeuges durchzuführen, Fehlercodes auslesen und löschen, Sensordaten abfragen, unterschiedliche Tests durchzuführen uvm. Software ist mehrsprachig und erfordert keine besondere Kfz kentnisse. |
|
|
|
|
|
| | | | |
|
VitalScan displays live diagnostic sensor data, reads diagnostic trouble codes, freeze frame data, oxygen sensor parameters and clears the "check engine" light and all trouble codes..
Features:
* Fully automated engine management scrolling sensor display service
* Connection via Bluetooth or serial (COM) port. Last good connection is recalled from memory for faster connection. COM1 to COM99 accessible.
* Read and clear both stored and pending Diagnostic Trouble Codes (DTC)
* Diagnostic Trouble Codes (DTC) description for P0 family of generic trouble codes
* Sensor highlighting available to focus on a single sensor. Graphical trace shown in this mode with automatic Y-axis range adjustment to highlight the smallest of variations in data patterns
* Full freeze frame data displayed from ECU store
* Oxygen sensors are displayed periodically using the Live Sensor service. Oxygen sensor monitoring test results are provided in a table for to detect lean and rich thresholds and test limits.
* Continuous monitors results and status supported.
* Logging to comma delimited file is supported for reading by Microsoft Excel or other data and spreadsheet packages.
* Records VIN from the vehicle, when the vehicle supports it.
* MIL light status reading and clearing
* OBD compliance for the vehicle under test is displayed
* Display sensor and freeze frame data in SI (metric), US (imperial) or UK (as SI, but with miles shown for distances) units.
* Highlighted sensors show maximum, minimum, average and current values.
* Sensors may be de-activated to improve the overall scan rate during the sensor service.
* Performance monitors included for time and distance measurements between two speed settings (say 0 to 60 mph) and fixed distance runs (say 1/4 mile testing)
* Incorporates a ScanShot feature button which will capture all sensors at the click on a button. All the sensor information is stored in an easy to view table such that several events may be recorded and analysed side by side.
* Fully automatic demonstration mode supported. Sit back and watch how the program works!
|
| | | | |
|
|
 |
|
|
| There are no products to list in this category. |
 |
|
|
|
|
|
|
|
|
|
|
|
|
| There are currently no product reviews |
|
|
|
|
|
|
 |
 |
 |
|
|
|
 |
Zahlungsoptionen |
|
|
PayPal
Überweisung
DHL Nachnahme
Western Union
|
|
|
|
|
|
|
|
|
|
|
|
|
