OBD / EOBD Accessories

OBD Accessories

Result Pages:  1  Displaying 1 to 15 (of 15 products)

Grid List
Board voltage connector - Cigarette on banana plugs Board voltage connector - Cigarette on banana plugs
(#38007)
Cigarette lighter plug on two banana plugs (4mm); equipped with a fuse (5A); cable length about 1.5 m (5ft.); This cable can supply equipment with appropriate input voltage from the cigarette lighter.
[ more informations ] [ Add to Wish List ]
7.99 €
incl. 19% Tax
(6.71 € Netto)
plus shipping

Buy 1 'Board voltage connector - Cigarette on banana plugs' now !
Power supply - 12V /  600mA  for ECU Simulators Power supply - 12V / 600mA for ECU Simulators
(#39596-600)
Stabilized Switching power supply for our OBD2/ECU-Simulators - and for most commercially available devices. Wide-range input voltage: 100-240 VAC 50/60 Hz Output voltage: 3,0 / 4,5 / 5,0 / 6,0 / 7,5 / 9,0 / 12 VDC...
[ more informations ] [ Add to Wish List ]
9.99 €
incl. 19% Tax
(8.40 € Netto)
plus shipping

Buy 1 'Power supply - 12V /  600mA  for ECU Simulators' now !
Power supply - 12V / 1000mA  for ECU Simulators Power supply - 12V / 1000mA for ECU Simulators
(#39596-1000)
Stabilized Switching power supply for our OBD2/ECU-Simulators - and for most commercially available devices. Wide-range input voltage: 100-240 VAC 50/60 Hz Output voltage: 3,0 / 4,5 / 5,0 / 6,0 / 7,5 / 9,0 / 12 VDC...
[ more informations ] [ Add to Wish List ]
12.99 €
incl. 19% Tax
(10.92 € Netto)
plus shipping

Buy 1 'Power supply - 12V / 1000mA  for ECU Simulators' now !
Power supply - 24V + 12V / 1000mA  for ECU Simulators Power supply - 24V + 12V / 1000mA for ECU Simulators
(#39595-1000)
Stabilized Switching power supply for our OBD2/ECU-Simulators - and for most commercially available devices. Wide-range input voltage: 100-240 VAC 50/60 Hz Output voltage: 9 / 12 / 15 / 18 / 20 / 24 VDC Output voltage is...
[ more informations ] [ Add to Wish List ]
24.99 €
incl. 19% Tax
(21.00 € Netto)
plus shipping

Buy 1 'Power supply - 24V + 12V / 1000mA  for ECU Simulators' now !
Power-Adapter for OBD-II interfaces - Typ A - 2.1mm Power-Adapter for OBD-II interfaces - Typ A - 2.1mm
(#30078-21)
With this adapter it is possible to connect any power supply to a device with an OBD-2 / EOBD socket. On the input side is a hollow plug socket (5.5 x 2.1mm). On the output side, there is a J1962 female plug. It is...
[ more informations ] [ Add to Wish List ]

Power-Adapter for OBD-II interfaces - Typ B - 2.5mm Power-Adapter for OBD-II interfaces - Typ B - 2.5mm
(#30078-25)
With this adapter it is possible to connect any power supply to a device with an OBD-2 / EOBD socket. On the input side is a hollow plug socket (5.5 x 2.5mm). On the output side, there is a J1962 female plug. It is...
[ more informations ] [ Add to Wish List ]

Power-Supply for OBD-II - Interfaces - Typ A1 - 12V / 600mA Power-Supply for OBD-II - Interfaces - Typ A1 - 12V / 600mA
(#30067)
Power-Supply for using OBD-2 interfaces without a connected car. 12 volts, 600 mA with female OBD-2 connector (J1962F) to connect all known interfaces. Supplies the power usually coming from the car.
[ more informations ] [ Add to Wish List ]
24.95 €
incl. 19% Tax
(20.97 € Netto)
plus shipping

Buy 1 'Power-Supply for OBD-II - Interfaces - Typ A1 - 12V / 600mA' now !
Power-Supply for OBD-II interfaces - Typ B1 - 12V / 600mA Power-Supply for OBD-II interfaces - Typ B1 - 12V / 600mA
(#30068-600)
Power supply for use of OBD-2 interfaces without a connected vehicle. 12 Volt, 600 mA with female OBD-2 jack (J1962F) in an ergonomic housing. The power supply takes over the other coming from the vehicle power supply.
[ more informations ] [ Add to Wish List ]

Power-Supply for OBD-II interfaces - Typ B2 - 12V / 1000mA Power-Supply for OBD-II interfaces - Typ B2 - 12V / 1000mA
(#30068-1000)
Power supply for use of OBD-2 interfaces without a connected vehicle. 12 Volt, 1000 mA with female OBD-2 jack (J1962F) in an ergonomic housing. The power supply takes over the other coming from the vehicle power supply.
[ more informations ] [ Add to Wish List ]

Power-Supply for OBD-II interfaces - Typ C1 - 12V / 1250mA Power-Supply for OBD-II interfaces - Typ C1 - 12V / 1250mA
very flat supply - special für service suitcases
(#30077-1250)
Power supply for use of OBD-2 interfaces without a connected vehicle. 12 Volt, 1250 mA with female OBD-2 jack (J1962F) in an ergonomic housing. The power supply has a 90 ° rotated plug and is therefore very compact....
[ more informations ] [ Add to Wish List ]

Powerstation for OBD-II interfaces - Typ A2 - 12V / 1000mA Powerstation for OBD-II interfaces - Typ A2 - 12V / 1000mA
(#30067-1000)
Power-Supply for using OBD-2 interfaces without a connected car. 12 volts, 1000 mA with female OBD-2 connector (J1962F) to connect all known interfaces. Supplies the power usually coming from the car.
[ more informations ] [ Add to Wish List ]

Serial cable connection, DB25M to DB9F Cable, 1.8m Serial cable connection, DB25M to DB9F Cable, 1.8m
(#30010)
Sub-D 9pol (socket) on Sub-D 25pol (plug) To the connection of the ScanTool (ElmScan) interface and many other devices (RS232) with the serial interface of your PC's.   Pinbelegung / Pin-Out
[ more informations ] [ Add to Wish List ]
4.85 €
incl. 19% Tax
(4.08 € Netto)
plus shipping

Buy 1 'Serial cable connection, DB25M to DB9F Cable, 1.8m' now !
Serial cable connection, DB9M to DB9F Cable, 1.8m Serial cable connection, DB9M to DB9F Cable, 1.8m
(#39617)
Sub-D 9pol (socket) on Sub-D 9pol (plug)To the connection of the diagnostic interfaces with the serial interface of your PC's.
[ more informations ] [ Add to Wish List ]
2.99 €
incl. 19% Tax
(2.51 € Netto)
plus shipping

Buy 1 'Serial cable connection, DB9M to DB9F Cable, 1.8m' now !
USB -> 2x RS232 (Dual) Serial to USB Converter USB -> 2x RS232 (Dual) Serial to USB Converter
(#30023)
This small USB converter cable converts the USB connection to TWO RS232 (2 COM-Ports). The typical Baud rates are supported from 1.200 to 115 k. The converter cable is full Plug & Play. Appropriate ones DEVICE...
[ more informations ] [ Add to Wish List ]
19.99 €
incl. 19% Tax
(16.80 € Netto)
plus shipping

Buy 1 'USB -> 2x RS232 (Dual) Serial to USB Converter' now !
USB -> RS232 Converter Cable for OBD-2 Interfaces from ScanTool.net USB -> RS232 Converter Cable for OBD-2 Interfaces from ScanTool.net
(#30011)
This small USB converter cable converts the USB connection to RS232 (COM-Port). The typical Baud rates are supported from 1.200 to 115 k. The converter cable is full Plug & Play. Appropriate ones DEVICE drivers for...
[ more informations ] [ Add to Wish List ]
14.95 €
incl. 19% Tax
(12.56 € Netto)
plus shipping

Buy 1 'USB -> RS232 Converter Cable for OBD-2 Interfaces from ScanTool.net' now !

Result Pages:  1  Displaying 1 to 15 (of 15 products)
Quick Find
 
Use keywords to find the product you are looking for.

Advanced Search
Manufacturers
0 items
0 items
Bestsellers

By default we ship worldwide - in every country - starting at € 11,99.

During the checkout process (even before the completion of the order) you are shown the actual cost.

A list of all shipping options can be found under the menu item Transport expenses.

Island Deliveries usually with extra charge - price please request by e-mail!