OBD-2/EOBD
multi-protocol interface 'ELMTester Pro327 ' as complete kit. Not only all
construction units and a professional enclosure are contained for plate assembly,
but also industrially manufactured cable (serial to the computer and OBD-2/EOBD
to the vehicle).
The ELM327 is the newest addition to the OBD family, providing CAN (ISO 15765-4)
support, as well as SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2 and ISO 14230-4.
ELM Electronics actually taken the best of the ELM320, the ELM322, and the
ELM323, improved on them and then added four CAN protocols.
Just as with the other ICs, the ELM327 transparently converts OBDII data into
standard ASCII characters, allowing trouble codes and operating parameters
to be easily retrieved without the need for special software. No knowledge
of data formatting, error checking, bus initiation etc. is needed either,
as the ELM327 handles all of it for you. You don't even need to know what
protocol your car 'speaks', as this IC automatically detects that for you,
too.
In addition to the protocols, we think that you will also enjoy some of the
enhancements. For example, the RS232 interface has been completely updated.
It is now a background task so it doesn't interfere with OBD receives, it
has a large data buffer to allow for fluctuations in the OBD data, and it
offers a second baud rate (38400).
There are many other features (like a battery monitoring input) that you will
only learn about
if you download either the (6 pages) ' Quick-Sheet
' or the full (59 pages) ' Data-Sheet
'.
|
 |
 |
ISO (ISO9141-2) |
|
|
CAN-Bus (ISO15765-4)
11Bit / 29Bit / 250kBaud / 500kBaud |
|
KWP2000 (ISO14230-4)
Fast & Slow |
|
|
|
PWM (SAE J1850) |
 |
CAN-Bus LowLevel
(''LAWICEL'' Modus) |
|
VPWM (SAE J1850)
|
|
K/L and KK/L
(for using VAG.com and other Software) |
|
|
|
|
|
|
 |
ELM327
Features...
The Special-Chip "327" from ELM Electronics offers many features
that make OBD interfacing easier:
-
12 supported protocols in v1.3, with variations
-
Standard
ascii characters used for all commands and responses
-
User
settable CAN mask and filter values
-
Programmable
Headers
-
Ability
to switch ISO modes to 9600 baud for experimentation
-
Ability
to bypass the initiation process and force a protocol to become active
-
Ability
to close a protocol at any time
-
Hardware
handshaking signals to simplify computer interfaces
-
Ability
to manually select any of the supported protocols
-
Last
successfully initiated protocol can be automatically stored in EEPROM
-
Voltage
input allows monitoring of the vehicles charging system
-
Voltage
input is easily field calibrated
-
Brownout
protection protects against problems from low voltages
-
Responses
can be factory programmed for other languages
-
Special
@1 string allows unique identifiers for larger Customers
-
9600
or 38400 baud RS232 communications
-
Standard
RS232 pin polarities
-
Busy
output, RTS input for RS232 handshaking
-
Can
send 8 byte OBD messages
-
Buffered
RS232 sending (256 byte)
-
Schmitt
trigger OBD inputs simplify interface in a noisy environment
-
Buffer
Dump command displays OBD messages as sent or received
-
ISO
9141/14230 wakeup string (idle message) is fully programmable
-
Warm
Start command provides a quick system reset alternative
|
|
 |
 |
 |
| Empty
PCP |
Construction
Units |
Enclosure |
| |
 |
 |
 |
| OBD-2
Cable |
RS232 Cable |
CD-ROM |
|
|
|
|
|
|
|
