The KWP2000 slow/fast init Multiple ECU simulator is a best suited tool for the development and testing of OBDII diagnostic programs and hardware. It simulates Engine ECU, TCM ECU and ABS ECU simultanously. More than 3 DTC are generated and sent in multiple frames. Reading suspended DTC and VIN is also possible. It has 5 user-adjustable and several fixed-value PIDs for each ECU. The DTC button can be used to generate trouble codes and illuminate the MIL LED. The trouble codes can be cleared using a Service 4 request. Physical connection is made through a standard SAE J1962 connector. This item needs a external 12V power supply.
Description :
ECUSim 1110 can simulate ECM (engine ECU
address 0x10) , TCM (transmission control ECU
address 0x18) and ABS ECU address 0x28
simultaneously.
It is compatible with OE90C1100. EOBD modes
(1,2,3,4,7,9) are implemented. Each ECU has
own PID table and variable PID can be changed
via potentiometers. The ECM can generate more
than 3 DTCs.
The OE91C1110 communicates at 10400 baud
with keywords 0x8F and 0xE9, respond to EOBD
addressing (0x33). With the slow/fast input, user
can select the init type of ECU.
Features:
- Compatible with ISO 14230-4
- 2.7 to 6V operating range
- MIL LED output
- Freeze Frame handling
- K Line communication
- Fixed or variable PIDs
- ECU address 0x33 EOBD Mode or 0x10
- Slow init / fast init selection possible
- MODE 1,2,3,4,7,9
- Physical and fonctional addressing
 DataSheet for "ECUSim1110" from Özen Elektronik.
|
